The flagpole mast broke in the wind about 9:05pm EST or so. I captured the destruction on the Wyze camera that watches it. It snapped right above the point it’s tied to the garage. Fortunately, it fell in an OK direction, so it didn’t damage anything around it.
I could try to put it back up with some spare pieces and guy it next time, or I could try the military surplus mast I picked up at a Ham Fest this past summer.
I’ll be contacting the 985 repeater digitally through Allstar for now.
I added some sections to the flag pole to reach 37 feet, and I increased elements on the home-made yagi from 2 elements to 4 elements. Upon adding elements, I needed to stretch the driven element a couple millimeters longer to tune it. In testing, I’m seeing about -100 RSSI listening to W3GMS on a Quansheng. It was about -105 RSSI when mounted lower and only 2 elements.
I figured out to do a tilt-up flag pole against the house reaching 25 feet into the air. It sits on a stake in the garden, and is secured to the house with paracord in an eyelet and hook screwed into the side of the roof.
I built a new 2-element yagi using an online calculator It tuned OK with the banana-clip adapter directly connected to the driven element. I first tuned the dipole, and then added the reflector element. As predicted, it shifted the tuning slightly, so I trimmed the driven element to retune. The nice thing is that the spacings and sizes of the original elements don’t change as you add more director elements, so I calculated it with 2 or 3 directors, but put none in for the first iteration. I can add more elements later.
I gave it a try to reach 985 with the TYT TH-9800 running 50W. It was scratchy, but copy-able. I have more flag pole sections ordered to make it a little higher.
