I activated US-8751, State Game Land 52. I deployed the speaker-wire doublet again in an inverted-V to operate 1W on 20M. It ran NW-SE, and I used the 4:1 and a 1:1 current balun on the coax. It tuned well in 20m, and caused no USB disconnects! My 1W FT8 signal was heard in France and Spain.
The Evolve 3 keyboard had some dead keys: w t. It doesn’t seem I can fix that, so it may need to be replaced.
I activated US-8878, State Game Land 181. It’s my 39th unique park activated on my way to the next award at 40. I made 11 FT8 contacts at 2-4W with my speaker-wire doublet pulled up into a tree. I had extended the length to 44ft length per some online recommendations.
The battery was low on my little Evolve 3 laptop, and I wanted to charge it from LiFePO, but it wouldn’t charge. It turns out that I had inserted the barrel adapter into the headphone jack instead of the tiny power port. The laptop had died at 9 contacts with 3 people calling me, so I switched to my other laptop to finish up.
10M tuned OK, 40M tuned OK, and 20M tuned easily, but with both laptops, the radio would drop the USB connection immediately upon transmitting. I may need to add a current balun between the radio and matching transformer.
I ran out to Susquehanna Riverlands State Park (US-9719) to test the EFHW again. This time I tied it to a bush and a picnic table and raised the center with the fishing pole mast.
I took the time to sweep all the bands with the X6100’s built-in analyzer app. 40m looked like it could stand to have the wire slightly shorter, but when I transmitted, the SWR looked fine. I saw about 1.5:1 SWR on 40, 20, and 15. 10 was a little off, so I guess I’ll add the 100pf capacitor that most people use.
The tuner made 12m and 17m work, so I made FT8 contacts on 40m, 20m, 15m, and 17m.
I was also trying out some of the combo winder/unun I 3d printed and made some notes. I’ll post my remix soon of another person’s OpenSCAD code. I like the all-in-one designs that wrap up into one package, but I wonder how much that will hinder my random experimentation with antennas.
While transmitting, I noticed the Evolve 3 laptop’s mouse would stop responding. I had seen this on other laptops using the 1/4 wave HF vertical. I added the common mode choke to the feed line near the radio, and that cleared up. There was already a choke near the antenna, but I guess it wasn’t enough. I love when I can see a clear cause and effect or problem and solution.
I failed to check-in do to RF issues, but my summary is still good.
