80m

Today I experimented with building a 64:1 unun for an 80-meter EFHW.

My initial attempt involved 3 primary / 24 secondary windings, but I quickly found that this took up too much space on the small toroid I was using.

After some adjustments, I settled on a 2 primary / 16 secondary windings, adding a 100pF capacitor. This configuration was inspired by resources like KM1NDY’s DIY linked EFHW 64:1 antenna guide.

I’m now successfully running my home EFHW antenna on 40 meters without needing a tuner. On 17 meters, the SWR is a bit high, so I engage the tuner for that band.

This setup reminds me a lot of my previous 71-foot random wire antenna with a 9:1 balun. I’m noticing a significant increase in the number of signals I’m receiving, which suggests this new EFHW might be a considerable improvement over my old 107-foot EFRW.

I launched my 80M EFHW at home, replacing my previous random wire setup. I’ve trimmed it up and folded it back, but it still needs the tuner to touch it up. I’m seeing the expected harmonics near each ham band, which is a good sign. My next step is to build a new 49:1 transformer for it.